Post-construction cleaning in Salmon Creek turns a jobsite into a move-in-ready space with detailed dust and debris cleanup for new builds and remodels. Construction dust is ambitious; fortunately, so are we.
✓Owner-operated✓Founded 2021✓High-end construction background
The final project phase
A true final clean after the trades are done
If you are scheduling post construction cleaning Salmon Creek, you are probably at the point where the work is finished, but the space still does not feel finished. Construction dust settles into window tracks, cabinets, trim edges, and floor corners. Adhesive smears and paint specks show up under daylight. And the first HVAC run can kick fine dust back into rooms that looked clean yesterday.
Clean Clark handles post-construction cleanup for homes and small commercial spaces around Salmon Creek and greater Vancouver, Washington. The goal is simple: remove the dust and jobsite residue that stops a new build or remodel from feeling truly ready.
You will work directly with an owner-operator. Clean Clark was founded in 2021 by John Carroll, whose background in high-end construction operations shaped a detail-first approach to finishing work. You are not getting a quick tidy. You are getting a practical, methodical clean that treats the space like a newly completed project with finishes worth protecting.
When Clean Clark is on site as Vancouver's local house service, we focus on the details that change how the space looks and how it lives on day one: clean lines on baseboards, clear glass, dust-free shelves, and floors that do not haze over again after the first walk-through.
What post-construction cleaning includes (and what it targets)
Post-construction cleaning is different from a standard house clean because the mess is different. The priority is fine dust control, careful wipe-down of finishes, and removal of residue left behind by multiple trades.
Typical focus areas include:
Dust removal top to bottom: ledges, trim faces, door frames, shelving, and other horizontal surfaces where fine dust settles.
Kitchen and bath surfaces: cabinet faces and interiors when requested, counters, backsplash areas, sinks, and hardware wiped to remove dust film and fingerprints.
Windows and tracks: glass cleaned, sills wiped, and tracks detailed where construction grit collects.
Floors: vacuuming with attention to edges, then damp cleaning appropriate to the floor type to remove lingering dust that makes new floors look dull.
Detail cleanup: paint specks, light adhesive residue, and handprints on smooth surfaces, handled with finish-safe methods.
If you are coordinating a final walkthrough for a builder, a remodel completion, or an upcoming move-in, we can scope the work around the condition of the site and what still needs time to cure. Some fresh finishes simply need the right cleaner and a lighter touch so they look new without being damaged.
We start by confirming what was built, what rooms were affected, and the current condition (dust level, debris, residue, and any sensitive finishes). We align on access, timing, and what needs to be move-in ready versus simply presentable for a walkthrough.
02
Dry work first (dust control)
We remove loose dust and grit before introducing moisture, paying extra attention to trim profiles, corners, shelves, window tracks, vents, and other collection points that make a space look unfinished.
03
Wet detailing and residue removal
After dust is under control, we wipe surfaces and detail problem areas like smudged paint, light adhesive residue, and fingerprints on smooth finishes, using methods appropriate to the materials in the home.
04
Floors and final presentation pass
We finish with floors and a final visual pass: check edges, glass, and high-visibility surfaces under real lighting so you can walk the space with confidence.
How Much Does Post Construction Cleaning Cost in Salmon Creek?
Post-construction cleaning in Salmon Creek typically ranges from about $350 to $900 for smaller remodel cleanups, while larger new-build final cleans often land around $900 to $2,000+ depending on square footage and detail level.
Price changes with dust load, number of bathrooms and windows, interior cabinet cleaning, floor type, whether the home is empty, and how much debris removal is needed. The exact cost is confirmed after a walk-through or clear project details so the scope matches what the site actually needs.
Most projects start in Salmon Creek because it is a busy area for both newer homes and active remodeling, and the details matter when you are trying to keep fresh finishes looking sharp. Clean Clark also schedules post construction cleaning Vancouver WA when you need a final clean for a home anywhere across the city.
If your project is north of Salmon Creek, we can also take on post construction cleaning Ridgefield WA for new construction and remodels where fine dust control is the difference between “done” and “ready.” For builds and renovations farther east, post construction cleaning Battle Ground WA is available when you need a careful final pass before move-in, photos, or handoff.
For other cleaning needs outside of a construction context, house cleaning in Vancouver can be a better fit once the dust has settled and you want routine upkeep.
Finished results
What a finished space should look like after a post-build clean
Common questions
Post-construction cleaning FAQs (Salmon Creek and Vancouver, WA)
How soon after construction can you schedule the final clean?+
As soon as the heavy dust-producing work is done and trades are finished with sanding, cutting, and drilling, a final clean can be scheduled. In Salmon Creek projects, the best results usually come when the site is cleared of tools and materials and any fresh paint or sealants have had enough time to set so surfaces can be wiped safely.
Do you remove construction debris and leftover materials?+
We can remove small leftover jobsite debris as part of the cleanup when it fits normal disposal, but large piles of construction waste are typically handled through the builder or a dedicated haul-off. During the scope, we confirm what is on site so the plan matches what you want removed and what should stay for warranty or touch-ups.
Will the clean include inside cabinets and drawers?+
Inside cabinets and drawers can be included when requested, and it is a common add-on for new builds and kitchen remodels. The need depends on whether cabinet boxes were exposed to dust during install and whether shelves have been stored on site.
Is post construction cleaning in Vancouver, WA different for occupied remodels?+
Yes, occupied remodel cleanup is planned to control dust spread and keep livable areas comfortable while still detailing the project area. We confirm which rooms are off-limits, how to handle personal items, and what needs to be ready first, especially when a family is living in the home during a Vancouver, WA renovation.
How long does a post-construction clean usually take?+
Most smaller remodel cleanups can be completed in a few hours, while full final cleans for larger homes often take most of a day and sometimes require a return visit after the last punch-list items. The schedule depends on square footage, window count, dust load, and whether the home is empty and accessible.
What should I do before you arrive to get the best result?+
The biggest help is having the site ready: floors swept of large debris, trades finished with sanding, and as many items removed from counters and floors as possible. If you have a builder punch list, sharing it during scoping helps prioritize what needs to look perfect for handoff.
Need your Salmon Creek project ready for walkthrough or move-in?
Tell Clean Clark what was built, what areas were affected, and your timing. We will confirm the scope, prioritize the high-visibility details, and schedule a post-construction clean that fits your handoff date.
